Snap Lever Wire Connector - Two Circuit｜ Other Products

Snap Lever Wire Connector - Two Circuit / Two Bus

Easy Lever Wire Connector for Quick Electrical Connections

This snap lever wire connector is a simple, reusable way to join wires without twisting, soldering, or using wire nuts. The lever-style design makes it easy to insert and secure wires by hand, making it a practical choice for lighting, small electrical projects, repairs, control wiring, and general AC wiring applications.

The two circuit / two bus layout allows multiple wires to be connected through separate clamping positions, helping create a clean and organized wiring connection. It is useful when connecting an indicator light, power lead, or device wiring in a compact space.

32A 250V AC Snap Lever Connector

This connector is rated for up to 32A at 250V AC, making it suitable for many common electrical connection jobs where a secure, tool-free wire connection is needed. The snap lever mechanism helps hold the wire firmly in place while still allowing the connection to be opened again if the wiring needs to be changed later.

Unlike permanent crimp or solder connections, this reusable lever wire connector can be opened and closed as needed, which is helpful during installation, testing, troubleshooting, or future service work.

Technical Specifications

Product Type
Snap Lever Wire Connector

Connector Layout
Two Circuit / Two Bus

Voltage Rating
250V AC

Current Rating
32A

Wire Size Range
0.08mm² to 2.5mm²

Approximate AWG Range
28 AWG to 14 AWG

Recommended Strip Length
About 9mm

Connection Style
Reusable snap lever clamp

Wire Size Range and Strip Length

This snap lever wire connector accepts wire sizes from approximately 0.08mm² to 2.5mm², which is roughly equivalent to 28 AWG to 14 AWG wire. For best results, the wire should be stripped to about 9mm before insertion.

After inserting the stripped wire into the fasten slot, close the lever fully and gently pull on the wire to confirm that it is securely clamped before powering the circuit.

Simple Installation Instructions

To use the connector, open the orange and blue lever fasteners fully. Place the two wires from the indicator light into the appropriate fasten slots, then close the levers to secure them.

Next, insert the power or device cables into the other two fasten slots and close those fasteners as well. Once all wires are installed, pull lightly on both sides of the connection to make sure each wire is held securely.

Clean, Reusable Wiring for Small Electrical Projects

This two circuit snap lever wire connector is a convenient choice for clean wiring layouts, quick field repairs, lighting connections, and general-purpose electrical work. The compact design, reusable lever clamps, and wide wire size range make it a useful connector to keep on hand for everyday wiring projects.

Product ID: Snap Lever Wire Connector - Two Circuit/Two Bus.
Brand:Vetco ElectronicsSKU:VUPN2926-CF