Other Products ｜Soudabond Easy Reusable Foamfo - Case of 12

Soudabond Easy is a fast curing, ready to use, one component, PU adhesive.

Integrated gun system
Reusable
Easy application
Time & money saving
Excellent adhesion to almost all substrates
Fast cure
High initial grip
Even adheres to moist surfaces 

20 oz. aerosol can Genius Gun
• Polyurethane Adhesive
• Moisture Cure, One Component
• One Can Replaces up to 10 (24oz gun)/ 7.5 (20oz
Genius) Quart Tubes of Solvent Based Adhesive
• One Can Covers up to 140ft 2 (24oz Gun)/ 105ft 2
(20oz Genius) of Insulation Boards
Base
Consistency
Curing system
Curing speed (*)
Skin formation (*)
Can be trimmed (*)
Full strength (*)
Post expansion
Thermal conductivity (DIN 52612)
Tensile strength
Shear strength
Temperature resistance
UL 723 (ASTM E 84) Fire test
Single component polyurethane
Stable adhesive foam (does not sag)
Moisture cure at room temperature
About 30 minutes -1.2-inch adhesive bead
About 8 minutes - 1.2-inch adhesive bead
About 50 minutes -1.2-inch adhesive bead
About 12 hours - 1.2-inch adhesive bead
Minimal
About 0.035 W/(m·K)
27.6 lb./in 2
20.6 lb. /in 2
-40°F to +194°F when cured/ +248 °F (up to max. 1 hour)
Flame Spread 15, Smoke Developed 35
(*) Measured at 68 °F / 65 % R.H. These values may vary depending on ambient factors such as temperature, humidity and type of substrate.
Limitations:
• Excellent adhesion on most substrates, except for PTFE, PE and PP.
• Always store can with the valve pointed upwards.
• Cured PU foam must be protected from UV radiation.
• Lower temperature and humidity will extend curing time.
• Excellent Adhesion to Most Building Materials
• Even Sticks to Moist Surfaces
• High Initial Grip (Green Strength)
• Great Thermal & Acoustical Insulation
• Cost-saving (Time & Labor)
• Solvent Free
• CFC-free Propellants, Harmless to Ozone Layer
Brand:SoudalCategory:AdhesivesSKU:143727Tags:Construction Adhesive, Insulation Foam, Polyurethane Sealant, Spray Adhesive