Shopping Spotlight｜ Other Products ｜GrindLazer Depth Control Gas-Powered Scarifier

Graco GrindLazer HP DC1013-G DCS Gas Powered Concrete Scarifier
The Graco GrindLazer HP DC1013-G DCS is Graco's premium high-production forward-cut concrete scarifier featuring an advanced Depth Control System (DCS), commercial Honda GX390 13 HP engine, electric start, and a 10-inch cutting width. Designed for contractors performing demanding concrete surface preparation, pavement marking removal, trip hazard repair, and industrial flooring projects, this model combines exceptional production rates with precise electronic depth control for unmatched consistency and operator efficiency.
Unlike conventional scarifiers that rely solely on manual depth adjustments, the DC1013-G DCS features Graco's intelligent Depth Control System, allowing operators to establish a cutter zero point while displaying the active cutting depth in real time. This improves accuracy, reduces operator guesswork, minimizes accidental drum drops, and helps produce consistent surface profiles across uneven concrete and asphalt surfaces.
Whether removing thermoplastic traffic markings, profiling concrete before epoxy coatings, or preparing warehouse floors for overlays, the GrindLazer HP DC1013-G DCS delivers professional-grade productivity, excellent maneuverability, and long-term reliability.

Why Choose the GrindLazer HP DC1013-G DCS?
Advanced Depth Control System (DCS)
One of the biggest advantages of this model is the integrated Depth Control System, which provides significantly greater accuracy than traditional manual adjustment systems.
Benefits include:

User-programmable zero point

Live cutting depth display

Fast adjustment for changing pavement conditions

Accurate thermoplastic inlay cutting

Consistent concrete profiling

Eliminates measuring and guesswork

Helps prevent accidental "dropped drum" damage

English and metric display options

Rugged, fully encapsulated electronics designed for vibration and harsh jobsite conditions

Honda GX390 Commercial Engine
The machine is powered by the legendary Honda GX390, delivering dependable commercial performance for demanding contractors.
Engine advantages include:

13 HP commercial output

GX390 overhead-valve engine

Electric start

Cyclone® air filtration system

Excellent fuel efficiency

Reliable cold-weather starting

Low maintenance

Proven long service life

Readily available Honda replacement parts

Electric Start Convenience
Unlike recoil-start machines, the DC1013-G DCS features electric start, allowing faster startups, especially in cold weather or during repeated stop-and-start operations. The system also contributes to longer belt life and reduces wear associated with repeated recoil starting.

High Production Performance
With a 10-inch maximum cutting width and production rates up to 800 sq. ft./hour, or up to 1,700 sq. ft./hour when paired with an optional LineDriver, the DC1013-G DCS is built for demanding commercial and municipal projects.

TriBelt Drive System
Graco's heavy-duty TriBelt Drive System maximizes power transfer while minimizing downtime.
Benefits include:

Three-cog belt design

Efficient power transmission

Reduced belt slippage

Longer belt life

Lower maintenance costs

Improved productivity

Fat Track™ Front Swivel Wheel
The oversized Fat Track™ front caster provides:

Easier turning

Better maneuverability

Improved control around curves

Reduced operator effort

Smoother handling on uneven surfaces

EasyGlide™ Wheel Mount System
The EasyGlide™ Wheel Mount System features:

Front-mounted caster

Dual rear pneumatic tires

Reduced vibration

Floating deck capability on uneven surfaces

Improved machine control

No-tool adjustment system

Dust Collection Ready
The integrated vacuum port allows connection to the optional Graco LazerVac® dust collection system, reducing airborne silica dust during concrete scarifying. An optional Dust Suppression Water Kit (Part No. 25N367) is also available for additional dust control.

LineDriver® Compatible
The DC1013-G DCS is fully compatible with the optional Graco LineDriver®, dramatically increasing productivity while reducing operator fatigue. The ride-on attachment can more than double production rates on large pavement-marking and surface-preparation jobs.

Typical Applications
Ideal for:

Concrete surface preparation

Concrete scarifying

Pavement marking removal

Thermoplastic line removal

Parking lot line removal

Highway markings

Airport markings

Sidewalk trip hazard repair

Concrete profiling

Epoxy floor preparation

Overlay preparation

Industrial floor restoration

Bridge deck preparation

Warehouse floor resurfacing

Construction zone marking removal

Pavement smoothing

Key Features
Advanced Depth Control System (DCS)

Digital Depth Control System (DCS) for precise cutter depth adjustment

User-programmable zero point to match the installed cutter assembly

Live display of active cutting depth

English and metric measurement display

Eliminates manual measuring and guesswork

Provides accurate depth for thermoplastic and tape inlay removal

Helps prevent damage caused by accidentally dropping the cutter drum

Rugged, fully encapsulated electronics protected against vibration, dust, weather, and harsh jobsite conditions

Remote momentary switch allows depth adjustments while keeping both hands on the machine

InstaCut™ Technology

Hands-on engagement of the cutting deck

Instantly raise or lower the cutter drum

Floating deck follows uneven pavement and concrete

No-tool engagement system

Improves productivity on varying surfaces

Honda Commercial Engine

Honda GX390 commercial engine

13 HP

Electric start

Cyclone® air filtration system protects against concrete dust

Contractor-grade reliability

Excellent cold-weather starting

Designed for long service life

Extreme-Duty ProStart™ System

Electric key start

Centrifugal clutch for safer cutter engagement

Easier cold-weather starts

Longer belt life

Eliminates broken recoil starters

Reduces operator fatigue

TriBelt™ Drive System

Heavy-duty 3-cog belt drive

Maximizes power transfer

Reduces belt slippage

Minimizes downtime

Longer belt service life

Vibration Reduction Technology

Up to 4× less vibration than competing machines

Pneumatic air-filled tires

Comfort-grip handlebars

Frame designed to reduce vibration transfer

Improves operator comfort during all-day operation

Fat Track™ Front Swivel Wheel

Large front caster

Easier turning

Better maneuverability

Reduced steering effort

Improved control around curves and corners

EasyGlide™ Wheel Mount System

Front-mounted caster with dual rear pneumatic tires

Allows the cutting deck to float over uneven surfaces

Improves tracking and control

No-tool adjustment system

Dust Management

Integrated vacuum port

Compatible with Graco LazerVac® dust collection systems

Optional Dust Suppression Water Kit (Part #25N367) available

Helps reduce airborne silica dust

LineDriver® Compatible

Compatible with the optional Graco LineDriver®

Increases productivity up to 1,700 sq. ft./hr

Reduces operator fatigue on large projects

Technical Specifications
 

Specification
Value

Manufacturer
Graco

Model
GrindLazer HP DC1013-G DCS

Part Number
25N658

Product Series
High Production Series

Machine Type
Concrete Scarifier

Cutter Type
Drum

Cut Direction
Forward

Maximum Cutting Width
10 in. (254 mm / 25.4 cm)

Cutter Drum Diameter
7 in.

Engine Brand
Honda

Engine Model
GX390

Engine Power
13 HP

Engine Start
Electric Start

Air Filter
Cyclone®

Depth Adjustment
Digital Depth Control System (DCS)

Maximum Production Rate
Up to 800 sq. ft./hr

Production Rate with LineDriver
Up to 1,700 sq. ft./hr

Vacuum Port
Yes

Water Connection
Optional

Dust Collection
LazerVac® Compatible

LineDriver Compatible
Yes (Optional)

 

Machine Dimensions & Performance
 

Specification
Value

Unpackaged Length
46 in. (116.8 cm)

Packaged Length
50.5 in. (128.3 cm)

Unpackaged Width
28 in. (71.1 cm)

Packaged Width
37 in. (94 cm)

Unpackaged Height
62 in. (157.5 cm)

Packaged Height
73 in. (185.4 cm)

Unpackaged Weight
365 lb (165 kg)

Packaged Weight
465 lb (211 kg)

 

Noise & Vibration
 

Specification
Value

Sound Power
108.6 dBA

Sound Pressure @ 1 m
92.1 dBA

Vibration (with LineDriver)
4.9 m/s²

 

Ideal Applications

Concrete surface preparation

Pavement marking removal

Thermoplastic line removal

Parking lot stripe removal

Highway marking removal

Airport runway markings

Construction zone markings

Sidewalk trip hazard removal

Pavement smoothing

Epoxy floor preparation

Concrete resurfacing

Overlay preparation

Industrial floor restoration

Warehouse floor preparation

Bridge deck preparation

Parking garage restoration

Adhesive removal

Coating removal

Paint removal

Surface texturing

Optional Accessories

Dust Suppression Water Kit (Part #25N367)

Retractable Line Pointer Guide (Part #24D984)

Graco LineDriver®

LazerVac® Dust Collection System

Multiple carbide and steel cutter drum assemblies

Replacement cutter shafts and spacers
Brand:GrindlazerSKU:25N658Tags:Concrete Scarifiers