No Oil Stain Remover｜ Other Products

NO OIL, your go-to solution for tackling deep-seated oil stains, grease, and greasy residues on various surfaces.
It is highly effective at removing stains from food oils and greasy foods, mineral oil, engine oil, diesel, lubricants, and greasy bituminous residues. With its unique formulation, NO OIL can be safely used on a wide range of surfaces, including delicate materials such as polished marble and acid-sensitive finishes, without causing damage or loss of shine. Whether used in kitchens, garages, workshops, or industrial environments, it helps restore surfaces to a clean, pristine condition.
Key Features

Deep penetrating action for removing deeply embedded oil and grease stains.

Versatile application suitable for most natural stones and hard surfaces.

Powerful solvent-based formula for stubborn stain removal.

Safe on delicate surfaces such as polished marble and acid-sensitive materials (test recommended).

Multi-purpose stain removal: food oils, mineral oils, engine oil, diesel, lubricants, and bituminous residues.

Does not damage or dull surface shine when used correctly.

Ready-to-use formulation (no mixing required).

Easy application and removal process with powder residue finish.

Effective for both residential and professional restoration use.

Technical Information

Product Name: No Oil (Made Ready to Use)

Technical Rating (1–Easy, 5–Difficult): ★

Best Used On: Most natural stones, including marble, and other hard surfaces (test first)

Application Method: Apply, let it dry, and remove

Applicator: Brush, spatula, direct application, etc. (NOT included)

Coverage: Depends on surface area and stain severity

Available Size: 500 mL

Developer: Faber®

Composition: Solvent-based

Important Notes:

Always test in an inconspicuous area before full application

Avoid contact with non-recommended surfaces

Product has a noticeable odor

Never mix with other chemicals

For professional use only

Product Safety & Disclaimer
For professional use only. Results may vary depending on stone type, condition, and stain severity. Multiple applications may be required for complete stain removal. This product is intended specifically for oil-based stains on stone surfaces. Users should evaluate suitability before application. The manufacturer and distributor are not responsible for misuse of the product. Always follow professional guidelines and test before full-scale use.
Preparation Instructions

Do not apply on heated or wet surfaces

Remove all waxes and surface coatings before use

Thoroughly clean the surface of dust and loose dirt

Protect surrounding areas not being treated

Always test in an inconspicuous area first

Application Directions

Shake well before use.

Pour directly onto the stained area, fully covering the stain.

Allow the product to act until completely dry (it will form a white powder residue).

Remove the dried powder using a soft brush, broom, cloth, or paper towel depending on surface type.

Clean the area with a slightly damp cloth or mop.

Allow to dry and evaluate results.

Repeat the process if necessary for deep or old stains.

Additional Notes

Designed specifically for oil-based stain removal from stone surfaces.

May require multiple applications depending on stain depth.

Different stone types may require adjusted techniques.

For detailed guidance, refer to the technical data sheet.

Frequently Asked Questions (FAQs)
Q1. What is NO OIL used for?

It is used to remove oil, grease, and hydrocarbon-based stains from stone and hard surfaces.

Q2. Can it be used on marble?

Yes. It is safe for polished marble and delicate stone when used correctly.

Q3. Does it require mixing or dilution?

No. It is a ready-to-use product and should not be mixed with other chemicals.

Q4. How does it work on stains?

It penetrates the stain, absorbs oils, and dries into a powder that can be easily removed.

Q5. Can it remove old or deep stains?

Yes. It is designed for deep-seated and stubborn oil-based stains, though multiple applications may be needed.

Q6. What surfaces is it suitable for?

Most natural stones, including marble, granite, and other hard surfaces (testing is recommended).

Q7. Does it damage surface shine?

No. When used properly, it does not dull or alter the surface finish.

Q8. What is the application method?

Apply directly, allow to dry completely, and then remove the residue before cleaning the surface.

Q9. Is it suitable for everyday cleaning?

No. It is intended for targeted stain removal, not routine maintenance cleaning.
Brand:MB Stone CareSKU:FBR-NOIL-500Tags:Chemical Cleaners, inventorytracked, Removers/Specialty/Miscellaneous