Hassle-Free｜Matte ABS Filament - 1.75mm - 1kg Spool - Olive Green｜ Other Products

Matte ABS Filament - 1.75mm - 1kg Spool - Olive Green

Matte Olive Green ABS Filament for Everyday 3D Printing
Give your prints a clean, low gloss look with this matte olive green ABS filament. The soft matte surface hides layer lines and skips the shiny plastic sheen, so models look finished right off the print bed with no extra sanding or coating. The deep olive tone is easy to live with and works well for props, tabletop pieces, tool holders, and everyday household parts.

Smooth Matte Finish You Can See and Feel
This is Kexcelled THE K5 ABS M matte filament, made from Acrylonitrile Butadiene Styrene (ABS). It prints with a smooth, even texture and near invisible layer lines. Each 1kg (2.2 lb) spool is wound neatly so it feeds without tangles, and the 1.75mm (0.069 in) diameter is held to a tight tolerance of +/- 0.03mm (0.0012 in) so flow stays consistent from the first layer to the last.

Strong and Heat Resistant ABS 3D Printer Filament
ABS is known for being tough, and this matte ABS 3D printer filament stands up to impact and daily handling better than ordinary ABS. It also holds its shape in warm conditions. The heat deflection temperature is 101 C (214 F) and the Vicat softening point is 113 C (235 F), so finished parts stay stable in a hot car, near equipment, or out in the sun.

Easy Printing on Most FDM Printers
This 1.75mm ABS filament fits most FDM 3D printers. For best results, set the nozzle between 240 and 270 C (464 to 518 F) and the heated bed between 80 and 100 C (176 to 212 F). A print speed of 40 to 80 mm/s with a retraction distance of 0.5 to 5mm (0.02 to 0.20 in) gives clean, reliable results. An enclosure helps cut down on warping when you print larger models.

Fresh, Moisture Free Packaging
Every roll is dried, then vacuum sealed with a desiccant pack to keep out moisture and dust before it reaches you. That helps the filament print cleanly with fewer bubbles and pops. If a spool sits for a while, drying it at 70 C (158 F) for 6 to 8 hours brings it back to top condition. The recyclable spool and box round out an eco friendly package that carries GRS certified recycled content.

Vetco Electronics stocks this olive green matte ABS filament under SKU VUPN2970. If you have questions about print settings or choosing the right filament for your project, our team is glad to help.

Specifications

Material
ABS (Acrylonitrile Butadiene Styrene), matte

Series
Kexcelled THE K5 ABS M

Color
Olive Green

Filament diameter
1.75mm (0.069 in)

Diameter tolerance
+/- 0.03mm (0.0012 in)

Net weight
1kg (2.2 lb)

Nozzle temperature
240 to 270 C (464 to 518 F)

Bed temperature
80 to 100 C (176 to 212 F)

Print speed
40 to 80 mm/s

Nozzle size
0.2mm (0.008 in) and larger

Retraction distance
0.5 to 5mm (0.02 to 0.20 in)

Retraction speed
30 to 70 mm/s

Drying
70 C (158 F) for 6 to 8 hours

Heat deflection temperature
101 C (214 F)

Vicat softening temperature
113 C (235 F)

Compatibility
Most FDM 3D printers

Vetco SKU
VUPN2970

Dimensions

Filament length
Approx 406 m (1332 ft)

Spool diameter
200mm (7.87 in)

Spool width
69mm (2.72 in)

Net weight
1kg (2.2 lb)
Brand:Vetco ElectronicsCategory:3D Printer Products - 3D Printer FilamentSKU:VUPN2970