Other Products ｜GreenGuard PB6 Roofing Cover Board

Kingspan® GreenGuard® PB6 Roofing Cover Board is a 3/8” thick closed-cell extruded polystyrene (XPS) fanfold with high-impact facers on both sides.
With ease of insulation and low water absorption, it is ideal for use with mechanically-fastened and ballasted EPD & TPO single-ply roof membranes. Compare to alternates based on weight, durability, product cost, handling and installation labor to see why the PB6 is your best choice.

Kingspan GreenGuard PB6 Product Data Table

Product Highlights

Smooth, level surface for new roof
Maintains integrity
UL Classified
Highly moisture resistant

Is it OK to install the building wrap upside down, sideways, or with the printing facing the wall?
In the case of RainDrop® building wrap, the product must be installed with the correct side to the exterior and the drainage channels vertical, or at a slight angle from vertical, for the product to function properly. (Horizontal drainage channels do not really work.) Performance of flat wraps is not particularly affected by install direction, from a fabric perspective. However, installing wrap consistently indicates that you have followed guidelines to achieve a proper water-resistive barrier. Care should be taken to install the wrap in a shingling fashion (check local codes for overlap requirements). In addition, the appearance of the final job sends a message. You can guess what message a sloppy, inconsistent installation sends.
Does fanfold provide good insulation value?
The primary purpose of fanfold is to level out the walls, so the new siding goes on straight. Fanfold does provide some additional R-Value to the wall depending on the thickness.
What's the R-Value of vacuum insulation?
Kingspan OPTIM-R has a design R-value of 28.
Why choose vacuum insulation panels?
VIPs provide the thinnest possible solution to insulation problems, while also providing an insulating performance that is up to five times better than commonly used insulation materials.
What Is KoolDuct made of?
The KoolDuct panels comprise a rigid closed cell non-fibrous phenolic insulation core faced on both sides with a protective 25-micron (1 mil) aluminum foil with low vapor permeability and reinforced with a 5 mm (0.2”) glass scrim.
Documents

Brochure Sell Sheet
Insulation Board Line Sheets
Product Data Sheet
Safety Data Sheet (SDS)
Installation Guides
20 Year Warranty

Technical Info

GreenGuard PB6 can be used in the residential, commercial, etc. applications.
GreenGuard is Extruded Polystyrene (XPS)
GreenGuard PB6 Roofing Cover Board is 4' wide and 50' long.

Code Compliance

Code Compliance Research Reports: CCRR-1022
Brand:KingspanSKU:PB6Tags:Building Materials, Call for Pricing, Recommendations disabled, Roof Cover BoardSize/Quantity:3/8" x 4' x 50 - 528 Squares